View HSW1142LTM_4563023.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HSW112LTM Series
Right Angle Type White LED
Features
Package Right Angle Type, 1142LTM : Diffused pale yellow resin, 1152LTM : Diffused pale orange resin Outer Dimension 2.8 x 0.95 x 0.8mm ( L x W x H ) Temperature range Storage Temperature : -40100 Operating Temperature : -3085 Lead-free soldering compatible RoHS compliant
Product features
Chromaticity coordinates
x = 0.299YP., y = 0.296TYP. (Condition : IF=20mA)
Spatial distribution Die materials Rank grouping parameter Assembly method Soldering methods Taping and reel ESD
115 deg. InGaN Sorted by luminous intensity and chromaticity per rank taping Auto pick & place machine (Auto Mounter)
Recommendation of Reflow soldering / Flow Soldering (Dip Soldering) is impossible.
3,000pcs per reel in a 8mm width tape. (Standard) Reel diameter:180mm 1kV (HBM)
Recommended Applications
Cellular Phone, Mobile Equipment, Electric Household Appliances, Other General Applications
2008.12.22 Page 1
HSW112LTM Series
Right Angle Type White LED
Color and Luminous Intensity
(Ta=25)
Part No.
Material
Emitted Color
Lens Color
Luminous Intensity Iv (mcd)
MIN. TYP. IF
Luminous Flux v (lm)
TYP. IF
HSW1142LTM HSW1152LTM 1
InGaN InGaN
White White
Pale 1,720 Yellow Pale 1,200 Orange
2,000 1,440
20 20
5.0 3.6
20 20
1 High Color reproduction Type Note : The above luminous intensity(Iv) is the setup values of the sorting machine. (Tolerance : IV...10%)
2008.12.22
Page 2
HSW112LTM Series
Right Angle Type White LED
Absolute Maximum Ratings
Item Power Dissipation Forward Current Pulse Forward Current 1 Derating (Ta=25 or higher) Reverse Voltage Operating Temperature Storage Temperature Symbol Pd IF IFRM IF IFRM VR Topr Tstg Absolute Maximum Ratings 1142LTM 114 30 100 0.4 1.33 5 -30 +85 -40 +100 1152LTM 114 30 100 0.4 1.33 5 Unit mW mA mA mA/ mA/ V
(Ta=25)
1 IFRM Measurement condition : Pulse Width1ms, Duty1/20
2008.12.22
Page 3
HSW112LTM Series
Right Angle Type White LED
Electro-Optical Characteristics
Characteristics 1142LTM 1152LTM TYP. IF =20mA VF MAX. VR =5V IF =20mA IR 2 1/2 x IF =20mA y TYP. 0.296 0.296 MAX. TYP. TYP. 3.5 50 115 0.299 3.5 50 115 0.299 A deg. 3.2 3.2 V
(Ta=25)
Item
Condition
Symbol
Unit
Forward Voltage 1 Reverse Current Half Intensity Angle Chromaticity Coordinates
1 Forward Voltage Tolerance Range : 0.1V
2008.12.22
Page 4
HSW112LTM Series
Right Angle Type White LED
Luminous Intensity Rank (1142LTM)
(Ta=25)
Intensity Tolerance each Rank : +/-10%
Rank VC VD WA WB
I V mcd Condition MIN. MAX. 1,720 1,860 1,860 2,000 IF=20mA 2,000 2,200 2,200 2,400
Please contact our sales staff concerning rank designation.
Luminous Intensity Rank (1152LTM)
(Ta=25)
Intensity Tolerance each Rank : +/-10%
Rank UC UD VA VB VC
I V mcd Condition MIN. MAX. 1,200 1,300 1,300 1,440 1,440 1,580 IF=20mA 1,580 1,720 1,720 1,860
Please contact our sales staff concerning rank designation.
2008.12.22
Page 5
HSW112LTM Series
Right Angle Type White LED
Sorting Chart for Chromaticity Coordinates
(Ta=25)
Chromaticity Coordinates Tolerance Each Rank : +/-0.01
LEFT DOWN point LEFT UP point RIGHT UP point RIGHT UP point
Rank 1p 1q 1r 1s 2p 2q 2r 2s
x 0.272 0.280 0.282 0.288 0.292 0.296 0.300 0.304
y 0.258 0.248 0.272 0.262 0.286 0.276 0.295 0.285
x 0.264 0.272 0.276 0.282 0.287 0.292 0.297 0.300
y 0.267 0.258 0.281 0.272 0.295 0.286 0.305 0.295
x 0.276 0.282 0.287 0.292 0.297 0.300 0.307 0.309
y 0.281 0.272 0.295 0.286 0.305 0.295 0.315 0.305
x 0.282 0.288 0.292 0.296 0.300 0.304 0.309 0.311
y 0.272 0.262 0.286 0.276 0.295 0.285 0.305 0.294
Please contact our sales staff concerning rank designation.
2008.12.22
Page 6
HSW112LTM Series
Right Angle Type White LED
Technical Data (1142LTM)
Spectral Distribution
Relative Intensity vs. Wavelength Condition : Ta = 25, IF = 20mA
Spatial Distribution Example
Condition : Ta = 25
Relative Intensity
Wavelength [nm]
Forward Voltage vs. Forward Current
Condition : Ta = 25
Forward Current vs. Relative Intensity
Condition : Ta = 25
Forward Current IF(mA)
Forward Voltage VF(V)
Relative Intensity
Forward Current IF(mA)
2008.12.22
Page 7
HSW112LTM Series
Right Angle Type White LED
Technical Data (1142LTM)
Derating
Ambient Temperature vs. Maximum Forward Current
Ambient Temperature vs. Relative Intensity
Condition : IF = 20mA
Maximum Forward Current : IF MAX. (mA)
Ambient Temperature : Ta()
Relative Intensity
Ambient Temperature : Ta()
Ambient Temperature vs. Forward Voltage
Condition : IF = 20mA
Forward Current vs. Chromaticity
Condition : Ta = 25
Forward Voltage VF(V)
Ambient Temperature : Ta()
y
x
2008.12.22
Page 8
HSW112LTM Series
Right Angle Type White LED
Technical Data (1142LTM)
Ambient Temperature vs. Chromaticity
Condition : IF = 20mA
y
x
2008.12.22
Page 9
HSW112LTM Series
Right Angle Type White LED
Technical Data (1152LTM)
Spectral Distribution
Relative Intensity vs. Wavelength Condition : Ta = 25, IF = 20mA
Spatial Distribution Example
Condition : Ta = 25
Relative Intensity
Wavelength [nm]
Forward Voltage vs. Forward Current
Condition : Ta = 25
Forward Current vs. Relative Intensity
Condition : Ta = 25
Forward Current IF(mA)
Forward Voltage VF(V)
Relative Intensity
Forward Current IF(mA)
2008.12.22
Page 10
HSW112LTM Series
Right Angle Type White LED
Technical Data (1152LTM)
Derating
Ambient Temperature vs. Maximum Forward Current
Ambient Temperature vs. Relative Intensity
Condition : IF = 20mA
Maximum Forward Current : IF MAX. (mA)
Ambient Temperature : Ta()
Relative Intensity
Ambient Temperature : Ta()
Ambient Temperature vs. Forward Voltage
Condition : IF = 20mA
Forward Current vs. Chromaticity
Condition : Ta = 25
Forward Voltage VF(V)
Ambient Temperature : Ta()
y
x
2008.12.22
Page 11
HSW112LTM Series
Right Angle Type White LED
Technical Data (1152LTM)
Ambient Temperature vs. Chromaticity
Condition : IF = 20mA
y
x
2008.12.22
Page 12
HSW112LTM Series
Right Angle Type White LED
Package Dimensions
(Unit: mm) Weight: (5.3)mg
Recommended Soldering Pattern
(Unit: mm)
Taping Specification
Quantity: 3,000pcs/ reel (standard)
(Unit: mm)
2008.12.22
Page 13
HSW112LTM Series
Right Angle Type White LED
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture.
Manual Soldering Conditions
Iron tip temp. Soldering time and frequency 350 3s 1 time (MAX.) (MAX.) (MAX.)
2008.12.22
Page 14
HSW112LTM Series
Right Angle Type White LED
Reliability Testing Result
Reliability Testing Result Applicable Standard Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. Storage Life Thermal Shock High Temp. Storage Life Low Temp. Storage Life Cycled Temp. Humidity Life Resistance to Reflow Soldering Electric Static Discharge (ESD) Vibration, Variable Frequency EIAJ ED4701/ 100(101) EIAJ ED4701/ 100(101) EIAJ ED4701/ 100(101) EIAJ ED4701/ 100(102) EIAJ ED4701/ 100(103) EIAJ ED4701/ 100(105) EIAJ ED4701/ 200(201) EIAJ ED4701/ 200(202) EIAJ ED4701/ 200(203) EIAJ ED4701/ 300(301) EIAJ ED4701/ 300(304) EIAJ ED4701/ 400(403) Testing Conditions Ta = 25, IF = 30mA Ta = 85 ,IF = 6mA Ta = -30, IF = 20mA Ta = 60, 90%, IF = 16mA Ta = 60, 90% Ta = -40 100 (each 15min.) Ta = 100 Ta = -40 Ta = -10 65, 95%, 24h/ cycle Preheat : 150 180(120s Max.) Soldering Temp. : 260(5s) Moisture Soak : 30, 70%, 72h C = 100pF, R2 = 1.5K, 1,000V 98.1m/ s (10G), 100 2KHz, 20min, XYZ each direction
2
Duration 1,000 h 1,000 h 1,000 h 1,000 h 1,000 h 200 cycles 1,000 h 1,000 h 10 cycles Twice once each polarity 2h
Failure 0/ 20 0/ 20 0/ 20 0/ 20 0/ 20 0/ 20 0/ 20 0/ 20 0/ 20 0/ 20 0/ 20 0/ 20
Failure Criteria
Items
Luminous Intensity Forward Voltage Reverse Current Cosmetic Appearance
Symbols
Iv VF IR -
Conditions
IF=20mA IF=20mA VR=5V -
Failure criteria
Testing Min. Value Spec. Min. Value x 0.7 Testing Max. Value Spec. Max. Value x 1.2 Testing Max. Value Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking
2008.12.22
Page 15
HSW112LTM Series
Right Angle Type White LED
Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the "Foreign Exchange and Foreign Trade Control Law," it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com
2008.12.22
Page 16

▲Up To Search▲

Price & Availability of HSW1142LTM

	To Download HSW1142LTM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .